Faucets for vessel sinks – Vessel sink sitting on the counter top or slightly recessed into the counter. They come in a variety of shapes and sizes, including bowls and boxes. The tap of a vessel sink is usually found behind the boat itself and is not connected to the sink body. Installing a vessel sink faucet is easy, since the water supply lines are connected directly to the faucet body.
Faucets for vessel sinks run the supply lines hot and cold twisted through the mounting hole in the counter. Screw the motherboard tap on supply lines so that it sits flush with the countertop. Insert supply lines for hot and cold water at the bottom of a body tap into one. Push a line in one of the holes in the bottom of the wrench and turn the nut to tighten. Repeat with the second line on the second hole.
Pull the supply lines carefully under the sink to keep them tense and straighten upright faucet. Make sure the tap is facing the right way. Pass the bottom of the supply lines through the mounting bracket or the nut tap and tighten the bracket against the underside of the counter to keep the faucets for vessel sinks in place. Connect the loose end of the supply lines to piping hot and cold water. Tighten connection nuts with adjustable pliers.